How to get the +10 dB to work with the footswitches?

[bassmayhem]

Hello!

I am new to this forum and have a question. I have tried to set one of the two CTL pedals to add +10 dB for solo volume. I cannot make that happen, however I do. The only thing that happens is that the LED lights up quickly when I hold down the pedal and the patch volume changes to something like 118 on a scale to 100, from 50 where it was set before. Please, help!!!

[sloopdawg]

sounds like you've got it set on momentary

[bassmayhem]

I'll check!
I wonder if my GT-10B is working correctly. Some strange things occurs, like it doesn't answer to changes in the programming. I changed FX-1 in a patch from wah to slow gear, the display said slow gear, the unit said wah...
Also, I cannot get the switch under the swell pedal to work. Sometimes the LED lights, sometime not. If I do a wah it won't switch on or off. Maybe I'm too old to understand how things are made correctly...?

[gumtown]

The Expression pedal switch is not a physical switch,
the pedal only compresses on a rubber block,
there is a pedal calibration setting to set how hard you press to activate it.

The Expression pedal switch could possible have a different function for each different patch,
most pedal settings are done per patch, unless set in the System pedal function area, which over-rides any patch setting.

In the Pedal/Fx section, CTL1 pedal Function would be set to "+10dB", or an alternative is

Use an assign like this

**********Assign 1***********

[On/Off] = On
[Target] = PATCH: Level Inc.10
[Min] = Off
[Max] = On
[Source] = CTRL 1 PDL
[Source Mode ] = Toggle
[Act Rng Lo] = 0
[Act Rng Hi] = 127

or use an Assign to toggle the patch volume between two fixed values

**********Assign 1***********

[On/Off] = On
[Target] = PDL: FV Level
[Min] = 80
[Max] = 100
[Source] = CTRL 1 PDL
[Source Mode ] = Toggle
[Act Rng Lo] = 0
[Act Rng Hi] = 127

[bassmayhem]

OK! Got it!
I got it to work. I also misunderstood the use of +10dB. I thought it was possible to toggle in +10dB for solo and then toggle out again, but it only added +10dB over and over again when pressing the pedal. I solved the need in another way...
I also got the expression pedal switch to work.
The strange thing with the Slow Gear not functioning when the patch said it did was only possible to solve with copying another patch and redo the thing. Some bug in the initial tweaking I did...
I like the GT-10B more and more...

[bassmayhem]

The only thing I don't get to work is having the volume pedal, then press the switch and go to wah pedal. The wah pedal is there all the time.

[bassmayhem]

Well, I got it all figured out now. All's up and running...