PDA

View Full Version : FCB Programing


pawel
03-17-2006, 11:51 AM
hi
what should i do to make the second conrtol-pedal of FCB 1010 work
thanks for all answers Pawel
Mincer
03-18-2006, 09:59 PM
firsat step is to join the FCB Yahoo group, read the FAQs and determin what firmware of the FCB you have. I'd recommend the editor for the FCB too, as it makes it a breeze to program.
pawel
03-19-2006, 12:05 PM
Thanks
It’s working now
I had to calibrate it
This is the link for it
http://www.mtnsys.com/faqfcb/Original%20FAQ/showfaqs.asp?FAQ=52#F52
For all guys, I think, you should read it.
It’s very helpful
sith
03-19-2006, 01:15 PM
well, i did calibrate it, still doesen't work. neither is your link. HELP!
pawel
03-19-2006, 02:09 PM
this will be
http://www.mtnsys.com/faq-fcb/showfaqs.asp
glennfin
03-25-2006, 11:31 PM
Try this...




well, i did calibrate it, still doesen't work. neither is your link. HELP!http://groups.yahoo.com/group/fcb1010/?yguid=251714308
sith
03-26-2006, 09:59 AM
yeah, i'm a member already, but i still found nothing. I'll just give up and use it for patch change :(

I suck :oops:
sith
03-26-2006, 10:01 AM
maybe someone will write a tutorial or something, just like gt-8 PRIMER, i'll just bi patient
Guitarreverend
03-27-2006, 10:33 AM
I once had the same problem. Doin' everything the same with the EXP2 settings compared to EXP 1 and no luck. But it was a bug in the FCB1010 editor software. I gave EXP 2 the same MIDI-channel as EXP1 in the editor, but it was not MIDI-dumped to the 1010. So I had to configure the MIDI-channel of EXP2 manualy...eh...footly. Maybe this is your problem also? :?
sith
03-27-2006, 10:50 AM
thanx for hint, i think i've tried this before, not sure of wha i wae doing :oops:

you got to understand, i really sucks at this. So far i only managed to turn it on succesfully :wink:
sith
04-04-2006, 08:43 AM
well, i made some progress but i still have some questions

i was
doing the thing to gradually add gain to patch. The behaviour was
strange, when pedal in low position-->no gain, than when going up some
time no change at all, than significant step and than as it should go..
don't quite understand :)

and another thing, i've downloaded sysex file from
webside and it's configured the way lower control buttons change
patches, upper five act like stompboxes. when i want to activate
stompbox (upper button) i have to press it twice to react, can this be
reduced only to one press?

how do i set global BPM with FCB?