Programing Help, "switchles wah" w/ the EXP Pedal

[Special_Ed]

I'm trying to set up my GT-Pro w/ a "Switchles Wah" simlar to a Morley Bad Horsie.

I figure it should be easy. Set it up so when the pedal is at its Zero position the Wah effect is off. When the pedal is in the 1 to 127 position the Wah effect is on.

I have Assign 2 set up w/ the Wah On/Off (CC#1).
And Assign 3 set up for Wah position (CC#1).

The problem is that the Wah On/Off is not at the bottom like I'd like. It's switching around 40% of the range.

I'm using a Roland FC-200 w/ a EV-5 expresion pedal plugged into CC#1. I'm wanting to keep the FC's exp pedal for volume all the time.


Is there anybody that can help me w/ this??????

Thanks.

[kim]

Hi
try
assign2 wah on/off minimum off,maximum on,minimum 10 maximum 127
assign3 wah position minumum 10,maximun 127

and check the knob on the ev-5 expression,it needs to be on max i think?

[Special_Ed]

Thanks for the help but I've figured out what's wrong. The EV-5 (both of them) have dead spots. I've opened them up and adjusted the pot so that it does send a signal at the bottom end of the travel. But now there's a dead spot at the top 1/4 of the travel.

I need to find a better expression pedal. One that has a full range of motion or is able to be calabrted.