PDA

View Full Version : Amp Control


Muckquaikerjawbreaker
02-05-2008, 03:30 PM
Does anybody know if the amp control is going to be like the GT-8, where you can only control one function? Because if it had the ability to control two functions that would rock, it'd definitely sway me towards getting the 10 rather than the 8.

I'm guessing it'll be too early to tell, but I thought I'd ask just incase someone happens to know. :)
DeRigueur
02-05-2008, 03:46 PM
Probably not. On the specs, it says the connector is 1/4" phone. If it was TRS, it would have said so.
Muckquaikerjawbreaker
02-05-2008, 03:53 PM
Probably not. On the specs, it says the connector is 1/4" phone. If it was TRS, it would have said so.

What's TRS? Sorry if that's a n00bish question. :icon_tongue:
mwc2112
02-05-2008, 04:14 PM
TS = Tip/Sleeve - 1 connector (the tip), mono/unbalanced, the sleeve is attached to the ground shield. This is like a normal instrument cable

TRS = Tip/Ring/Sleeve - 2 connectors (the tip and the ring), stereo/balanced, he sleeve is also attached to the ground shield. This is like the connector on a set of headphones.
Muckquaikerjawbreaker
02-05-2008, 04:27 PM
TS = Tip/Sleeve - 1 connector (the tip), mono/unbalanced, the sleeve is attached to the ground shield. This is like a normal instrument cable

TRS = Tip/Ring/Sleeve - 2 connectors (the tip and the ring), stereo/balanced, he sleeve is also attached to the ground shield. This is like the connector on a set of headphones.

Ah okay. Cheers!